Saturday, August 1, 2009

So... what IS wort, anyway?

I recently realized that, in all the posts I've made on this blog, I've never explained the name. For homebrewers or those familiar with the brewing process, it's probably clear. But for those new to the craft beer scene, or who aren't generally familiar with brewing terms, I've probably left you wondering why in the world this blog has the name it does.

Wonder no more!

Wort (pronounced "wert") is basically unfermented beer. The brewing process goes something like this:
  1. Mix cracked grain & hot water together and steep to release sugars.
  2. Remove the liquid from the grain and put into a boiling pot. (Or, if you use a brewing bag, remove the bag from your boiling kettle, leaving just the liquid in the pot.) This is your wort! This is also the starting point for extract brewers.
  3. Boil the wort to remove unwanted stuff (like sulfur, which can lead to excessive DMS) & add hops.
  4. Chill the wort & transfer to your fermenter
  5. Pitch the yeast into the wort.
  6. Ferment at the desired temp & duration, then transfer the beer into a keg or add a little corn sugar (to kickstart fermentation & create CO2) then transfer into bottles.

Chilling the wort can be done in a variety of ways. Some people put their brew kettle in an ice bath, which does the job pretty well. This works really well for extract recipes, where you might be boiling a smaller amount of concentrated wort and diluting it when you transfer it to the fermenter. It doesn't work so well, however, for larger volumes of wort, say, 5+ gallons.

Enter the wort chiller. That's the coiled copper thing you see there in the photo - hook it up to a couple of garden hoses (one for input, one for output) & stick that baby into the boiling wort to sanitize it. When the boil's done, turn on the faucet. The cold water running through the copper chills the wort. The crud you see there on the bottom of the boiling pot is coagulated protein, hop pellet goo, and other various particulates from the wort. Cold break is good - it helps clarify the beer - and will happen with rapid chilling.

Yeast is added to the wort and fermentation begins.

So there you go... welcome to the wonderful world of wort!

2 comments:

  1. AWESOME picture with the cold break. That looks like the Duvel clone that you did at the first brew day, but not sure.

    Also I cannot bring myself to say Wert. I mean if it was spelled that way than I could. I made sure before I started brewing and several references say "Wawrt" pronounciation is okay. Plus it just goes with the whole worthog thing. You say tomato, I say poop. It's all the same.

    ReplyDelete
  2. That is, indeed, the Duvel clone from brewday #1. Which turned out awesome, I am so proud.

    I'll probably blog about it tomorrow.

    ReplyDelete

Tasting Notes

ShareThis